How much does an electrician cost in New York? Based on BLS OEWS May 2024 wage data and RSMeans 2024 construction costs, here are real numbers — not the "$99–$975" ranges you get from lead-gen sites.
NYC requires a master electrician to file permits with DOB. Union labor is standard. Pre-war buildings often have BX cable requiring careful handling.
Every price below is adjusted to New York's labor market using a 1.54× city index applied to RSMeans 2024 national data. Labor hours assume standard conditions — add 15–40% for older homes, difficult access, or code catch-up.
| Job | Price Range | Hours | Permit |
|---|---|---|---|
|
GFCI Outlet Install
NEC 210.8: Required within 6ft of any sink. Protects all downstream outlets on same circuit.
|
$116–$385 | 1h | No |
|
AFCI Breaker Upgrade (per circuit)
NEC 210.12 (2020): AFCI required for all 15/20A branch circuits in living areas.
|
$116–$308 | 1h | Required |
|
Tamper-Resistant Outlets (per room)
NEC 406.12 (2008): Required at all 15/20A receptacles in all rooms (not just kitchens/baths).
|
$154–$462 | 1h | No |
|
Ceiling Fan Replace (existing box)
Verify existing box has "Acceptable for Fan Support" stamp before installing.
|
$154–$693 | 1.5h | No |
|
Outdoor GFCI Outlets (×2)
Must be in weatherproof in-use cover (NEC 406.9). WR+GFCI device required.
|
$308–$924 | 2h | No |
|
New 20A Dedicated Circuit
Dishwashers, microwaves, refrigerators, washers all require dedicated 20A circuits.
|
$385–$1,155 | 3h | Required |
|
Smoke/CO Detectors - Hardwired (×4)
Interconnected required in new construction. Battery backup required on all.
|
$462–$1,232 | 3h | No |
|
New 240V Circuit (30-50A)
For dryers (30A), ranges (50A), HVAC (varies). Run 10/3 or 6/3 Romex.
|
$539–$1,694 | 4h | Required |
|
Ceiling Fan + New Box + Circuit
Fan-rated box required (NEC 314.27). Standard round boxes cannot support fan load.
|
$539–$1,386 | 3.5h | No |
|
Meter Socket Replacement
Utility owns the meter, homeowner owns the socket. Get utility approval first.
|
$616–$1,848 | 4h | Required |
|
Recessed Lights Install (×4)
IC-rated can required in insulated ceilings. LED retrofit is 15-min vs full can replacement.
|
$616–$1,848 | 4h | No |
|
Generator Transfer Switch (manual)
Interlock kit vs manual transfer switch - never backfeed utility (NEC 702).
|
$616–$1,848 | 4h | Required |
|
Service Entrance Cable Replace
Damaged SE cable is a critical fire/shock hazard. Utility must disconnect.
|
$924–$3,080 | 5h | Required |
|
EV Charger Level 2 Hardwired
Panel proximity = biggest cost variable. 50ft run vs 5ft = $300-600 wire cost difference.
|
$1,078–$2,926 | 4.5h | Required |
|
Subpanel Install (100A)
Must be properly grounded and bonded. Cannot bond neutral to ground at subpanel (NEC 250.142).
|
$1,232–$3,388 | 6h | Required |
|
Aluminum Branch Wiring Remediation
Options: full rewire (safest), CO/ALR at every device, AlumiConn at every junction.
|
$1,540–$6,160 | 10h | Required |
|
Panel Upgrade 60A→100A
60A fuse boxes are a home insurance red flag. Utility coordination required.
|
$1,848–$4,620 | 7h | Required |
|
K&T Partial Update (1 circuit)
Partial is often false economy - connected circuits still ungrounded.
|
$2,310–$6,160 | 12h | Required |
|
Solar Inverter Replacement
Microinverter vs string inverter - different replacement process entirely.
|
$2,310–$6,160 | 6h | Required |
|
Panel Replace - Pushmatic
Pushmatic panels: Bulldog brand, button-style breakers, no trip test capability.
|
$2,772–$6,160 | 9h | Required |
|
Panel Upgrade 100A→200A
Utility shutoff adds 1-3 day delay. Load calculation required. Inspector same day.
|
$2,772–$6,468 | 8h | Required |
|
Panel Replace - Zinsco/Sylvania
Zinsco breakers bond to bus bar, fail to trip while appearing OFF. Same danger as FPE.
|
$3,080–$6,930 | 9h | Required |
|
Panel Replace - FPE Stab-Lok
FPE Stab-Lok: 25-65% breaker failure rate (IEEE). Most insurers now require disclosure or replacement.
|
$3,388–$7,700 | 10h | Required |
|
Panel Upgrade 200A→400A
Required for large homes with EV charging, whole-home generators, electric heating.
|
$5,390–$12,320 | 12h | Required |
|
Standby Generator Install (whole-home)
Gas line, automatic transfer switch, utility coordination, concrete pad all required.
|
$12,320–$30,800 | 20h | Required |
|
Whole Home Rewire
NECA: 100-160 hrs for 1,500 sqft. Drywall patching = 30-40% of total cost.
|
$18,480–$53,900 | 140h | Required |
|
Knob & Tube Full Rewire
Cannot insulate over K&T (NEC 394.12). Every circuit requires complete conductor replacement.
|
$23,100–$69,300 | 160h | Required |
Prices: RSMeans 2024 × 1.54 (New York index). Labor: BLS OEWS May 2024. Code: NEC 2023 (National Electrical Code). Required for all panel work, new circuits, and service upgrades in every US jurisdiction.
Upload a photo. Five AI agents identify the problem, check code violations, price it with New York's actual labor rates, and tell you exactly what to ask the contractor.
Free Electrical Estimate →